Benefits of Quality Installation for a New HVAC System

Posted on: June 28, 2018 | by: HVAC.com July 24, 2018

Installing a new HVAC system for your home offers many advantages. You’ll gain improved energy efficiency, fewer repairs, better indoor comfort, and a longer service life. Quality installation for your new HVAC system is critical for making sure you gain these benefits – a botched installation can leave you feeling uncomfortable and with many problems to correct.

 

 

Why is Quality HVAC Installation Important?

 

When selecting a new HVAC system, features are important – capacity, efficiency, convenience. The truth is, these features will not do you the good you expect if the heating or cooling system is not installed properly. Proper HVAC installation allows a new heating or cooling system to function as expected and perform to the levels stated.

 

Quality HVAC Installation

 

Here’s how proper installation will improve your new system experience:

  • Efficiency: If a new heating or cooling system is not installed according to the manufacturer’s specifications, it will not perform properly. When the system isn’t performing as expected, efficiency levels are impacted. While you purchased your new system based on the high SEER, HSPF, AFUE, and/or EER ratings, the system will not be offering such efficiency when it is not installed properly. The additional investment you made in a higher efficiency unit will not provide the return in energy savings you expect without skilled installation. The unit is forced to consume more energy to get the job done. Poor HVAC installation has the potential to decrease efficiency by up to 30 percent!
  • Comfort: Without proper installation, your new heating or cooling system cannot perform properly. Performance issues often translate into poor comfort control in the home. When installation is botched, it may be difficult for the system to deliver the appropriate amounts of heating or cooling, or maintain even temperatures throughout the home. While you purchased a new HVAC unit for improved comfort, you’ll find it’s a struggle to achieve when installation is faulty.
  • Service Life: A faulty installation is costly in energy waste and poor comfort control, but also service life. A unit not installed to correct specifications is likely to fail earlier than if it had been installed correctly. This is because a faulty installation forces the system to work improperly, consuming more energy to work and stressing the system. Components wear out faster and the stress causes increased breakdowns. HVAC units typically last between 10 to 15 years; one that was installed improperly will be more likely to fail sooner. Improper installation costs you more because you’ll be paying to replace the unit sooner than expected.

 

Preparing Your Home for HVAC Installation

 

While the major HVAC installation work will be performed by your HVAC technician, there are a few steps homeowners can take to prepare their homes for a new heating or cooling system. Taking these steps before the installation date can help the job be completed quickly and effectively.

  • Check with your HVAC installer to learn if they will obtain any necessary permits, or if you must. If you must obtain permits for the installation of your new heating or cooling system, make sure you do so ahead of the date of installation so all is in order when the day comes.
  • Clear the area surrounding where your new system will be installed. For exterior air conditioners and heat pumps, remove any outdoor items nearby and clear away vegetation. Make sure the HVAC installer has access to the installation site – remember to unlock or open gates. For furnaces and air handlers installed inside, remove any items stored nearby (items should not be stored in the area immediately surrounding your HVAC equipment) to provide a sufficient worksite for installation. Make sure the HVAC installer has access to the garage, basement, attic, or utility closet where your new system will be installed.

 

Prepare for Installing a New HVAC System with HVAC.com!

 

HVAC.com is the world’s leading heating and cooling resource site – we have tons of information to help you prepare for your HVAC system installation throughout our blog, FAQs, and other resources. When it’s time to get the job done, turn to our HVAC Contractor Directory to find a local heating and cooling professional to install your new HVAC system. Enter your ZIP code for a listing of local professionals you can trust!

 

Find a Certified HVAC Pro

Join Our Communities

Explore by Category