HVAC.com’s Guide to Heating: Installation, Maintenance, Repairs, Cost & More

 

Homes throughout the U.S. need reliable heating systems that provide comfortable and safe temperatures throughout the cold winter. No matter where you are, when outdoor temperatures dip, heating systems kick on to keep your home nice and warm.

 

Heating systems use various equipment to keep indoor spaces warm. Over their useful life, they have maintenance and repair needs – some are simple enough for homeowners to perform, while others require the assistance of a heating contractor.

 

HVAC.com has compiled what you need to know about heating systems. We cover system types, installation, repairs, maintenance, and more! Learn more about heating systems so you are well-informed to make smart purchase decisions and care for your heating system over its years of service.

 

Types of Heating Systems

 

Homes in the U.S. use various types of heating systems. The right choice for your home depends on your area’s climate and heating needs. For heating installation, consider the following system types:

 

  • Furnaces: Furnaces are typically powered by natural gas, liquid propane, heating oil, or electricity. They burn fuel to create heat that is added to the air. This reliable heating system is widely used across the country.

 

  • Heat pumps: Heat pumps provide both heating and cooling through the transfer of heat between a home’s interiors and the outdoors. They run using electricity, and either exchange heat between air sources, or natural sources, which are known as geothermal heat pump systems. Geothermal systems can be more widely used, while air source heat pumps provide sufficient heating in mild climates.

 

  • Boilers: Boilers heat water and create heating in the home through the use of hot water or steam. These systems are found in older homes and are also used in newer ones.

 

  • In-floor heating: In-floor heating installation is a network of fluid filled piping or heating coils installed typically below the floor of a room, but are also sometimes installed within walls or ceilings. They warm rooms through radiant heating, and can also be used outdoors in driveways and walkways.

 

  • Ductless heating: Ductless mini-split heating systems use individual air handlers installed throughout a home which are connected to a central outdoor heat pump. They do not use ducts and deliver zoned heating and cooling to the areas in which they are installed.

 

Popular Brands for Heating Installation

 

The HVAC industry is home to many great brands who manufacture quality heating equipment for home use. Check out the following heating manufacturers when you plan your next heating installation:

 

Heating Installation Considerations

 

Your heating contractor is available to help you determine the best heating installation type for your home, including heating equipment selection. In addition to the selection of the type of heating system and brand, the following factors are considered when you undergo a new heating installation in your home:

 

Fuel Source

 

Natural gas is a commonly used heating fuel across the country due to its low price compared to electricity. Some homes don’t have natural gas hookups so electric heating installation may be the preferred choice to avoid the expense of running gas lines to the home.

 

Capacity

 

To determine what size heating installation is needed, the home’s heating load must be configured. Heating equipment comes in a variety of sizes, it is not one size fits all. To determine heating load, many factors are considered such as square footage, ceiling height, construction type, directional exposure, and more.

 

Energy Efficiency

 

New heating installations offer higher energy efficiency levels than before. Generally, the more efficient your heating equipment, the more it costs upfront, but the more you are able to save on your heating bills.

 

Cost of Heating Installation

 

Heating installation varies in price, due to the factors above and other considerations specific to your home. When you undergo a new heating installation, the following costs are average across the country:

  • Furnaces: $4,200
  • Air Source Heat Pumps: $5,000
  • Geothermal Heating Systems: $10,000 and up
  • Boilers: $4,000
  • Ductless Heating: $4,000 and up
  • In-floor Heating: $10 per square foot

 

Heating Maintenance

 

Heating systems require regular maintenance to maintain performance and efficiency. Preventative heating maintenance is performed by your HVAC technician each year to give the system the professional heating service it needs to optimally perform through the winter. Always schedule heating maintenance with your HVAC company for the heating help your system needs to make it through heating season.

 

In addition to professional heating help, the heating maintenance steps for homeowners include:

  • Inspect and change furnace filters on a regular basis
  • Keep registers, vents, and return air grills uncovered
  • Keep the areas surrounding heating equipment clear of items and debris
  • Check carbon monoxide detectors
  • Adjust thermostat schedules for heating season

 

Heating Repair

 

Over its years of useful life, your HVAC system will likely encounter the need for heating repair. Heating repair varies from very minor issues to severe ones, and have the potential to drastically limit performance or even take your equipment out of commission. Operating your heating system when repairs are needed risks permanent equipment damage.

 

With such a range of issues that can go wrong in a mechanical system, the cost of heating repair is difficult to pinpoint. Homeowners typically pay an average of $270 per heating repair, but costs can range over $1,500 depending on the issue at hand. Be prepared to pay a service call fee for a heating technician to inspect and diagnose your system, which is usually $100 or less, except in the event of a heating emergency.

 

10 Things You Should Know About Heating

 

The top 10 takeaways from this heating guide that you need to remember are:

 

  1. There are many different types of heating systems. Work with your heating professional to determine the best choice for your home.
  2. There are many quality brands of heating equipment available. Explore major brands to determine the best solution for heating installation in your home.
  3. Fuel source is a major consideration when selecting a heating system. It affects the equipment price as well as the price you’ll pay to heat your home over the years.
  4. Heating systems are not one size fits all – a professional needs to calculate your home’s heating load to determine the appropriate size.
  5. Heating systems vary in price from one type to the next, and factors such as fuel type, energy efficiency, and capacity all factor in to your total.
  6. Heating systems need both professional maintenance and attention from homeowners to optimally perform throughout heating season.
  7. Never skip a preventative heating maintenance visit with your HVAC professional.
  8. Heating repair is a complex issue, sometimes problems are minor or major. Heating repair averages about $270 in cost but can be much higher depending on the problem at hand.
  9. Most HVAC contractors charge a service call fee when heating repairs are needed. This covers diagnosis of your heating problems.
  10. Never operate your heating system when there is a performance problem at hand – you risk doing extensive and permanent damage to your heating equipment.

 

HVAC.com is your resource for heating help! In addition to the valuable resources available to you on our website, use our HVAC Contractor Directory to locate a heating company near you when you need heating installation, heating repair, or heating maintenance.

 

Find a Certified HVAC Pro

 

 

Additional Resources

Understanding Your HVAC System: Heating, Air Conditioning & Ventilation

Benefits of Quality Installation for a New HVAC System

HVAC.com’s Guide to Furnace Installation, Maintenance, Repairs, Cost & More

Winter HVAC Maintenance Guide

The Best Way to Heat & Cool Old Houses